Bluetti EB70 Grey Portable Power Station 716Wh

Specifications

SKU EB70-Gray-1

Brand Bluetti

GTIN 6970991290282

Product Category Portable Power Stations

Operating Temperature -4-104℉ (-20-40℃)

Management System MPPT Controller, BMS, etc.

Tested&Certifications UKCA, CE, RCM, NTC, KC

Pass-through Charge Yes

Solar (200W) ≈4-4.5 Hours (With prime sunshine, ideal orientation and low temperature)

AC Adapter (200W) ≈4-4.5 Hours

Car Input 12/24V from Cigarette Lighter Port

AC Adapter Input 200W Max

Wireless Charging Pad 1 x 15W Max.

USB-A Port 2 x 5V/3A

USB-C Port 2 x 100W Max

Surge Power 1,400W

Inverter Type Pure Sine Wave

AC Outlets 2 x 220-240V AC Outlets, 1000W In Total

-Weight 9.7 kg

Shelf-life Recharge to 80% Every 3-6 Months

Life Cycles 2,500+ Cycles to 80% Original Capacity

Type LiFePO4 (Lithium Iron Phosphate)

Amp Hours (Ah) @ V 32Ah @22.4V

Storage Temperature 14-113℉ (-10-45℃)

Max Solar Input 200W Max. OCV 12-28V, 8A

Weight (kg) 9.7

Watt hours (Wh) 716

Capacity 716Wh (22.4V, 32Ah)

Dimensions 320 x 217 x 222mm

NOTE: see full product specifications & further product info in the Description section on this page.

Q & A

---

• Can I use non Bluetti branded solar panels with my Bluetti Lithium Power Station?

  Yes, provided your solar panel/s have MC4 Connectors which will attach to the Bluetti Power Station. If your solar panel has an Anderson connector, you will need to buy an Anderson to MC4 charging cable. Please also note that each power station will have a maximum open circuit voltage.

• How do I know whether my appliance can work well with the EB70?

  Calculate the total wattage of your devices. EB70 should work if the load doesn't exceed its rated 1000W. Friendly Note: For some devices with motor / compressor built inside, the instant start-up power may be 2-4 times more than the rated power, which may exceed the upper limit of the EB70.

• How long will EB70 power my device?

  Working time (estimation) = 716Wh* 0.85 / operating power of your device. (0.85=Conversion Rate). Please note that the actual working time may vary under different situations.

• Can I use third party solar panels?

  PV input requirements for EB70:

  1. Open Circuit Voltage (OCV) between 12V-28V; MAX input current: 8A; Input Power: 200W Max.
  2. Equipped with MC4 Connector. If your panel has an Anderson connector, please purchase Anderson to MC4 cable, separately.You can click to buy Anderson to MC4 cable.

  Best Companion:

  1. 1*BLUETTI PV200 (200W), fully recharge from 0-100% ≈4hrs*.
  2. 1*BLUETTI PV120 (120W), fully recharge from 0-100% ≈6.5hrs*.

  Friendly Note: The actual charging time depends on the weather, solar condition, and the angle of the solar panels

• Can it charge and discharge simultaneously?

  Yes, the EB70 supports pass-through charging; equipped with the premium LiFePO4 battery and the advanced Battery Management System, just feel free to use it the way that better suits your needs.

• How long can it run my device?

  Running time = Battery capacity × DoD × η ÷ Device rated power. DoD refers to Depth of Discharge and η is local inverter efficiency. For EB70, both DoD and η are 90%. If you run a 500W blender with it, the running time will be: 716Wh × 90% × 90% ÷ 500W ≈ 1.2hrs

  Note:

  1. The formula is NOT suitable for inductive loads with compressors, like refrigerator, air conditioner, etc.
  2. The above data is for reference ONLY.
• What is the maximum input charging power of the BLUETTI EB70?

  200W Max.

• Is the EB70 power station waterproof?

  No. Also, please do NOT store it in a humid environment for a long time.

• Can I use or charge EB70 in sub-zero temperatures?

  Temperature ranges for EB70S are:

  • Charge: 0-40℃ (32-104℉);
  • Discharge: -20-40℃ (-4-104℉);
  • Storage: -20-40℃ (-4-104℉).

  Technically, it can power electrical devices under such situations, but please avoid charging it.

• Can it be laid on its side to save space?

  No. Long-term placement will make the internal structure loose, it is recommended to place the machine upright.

• Does EB70 support BLUETTI App control?

  No.

• Can I expand its capacity by connecting with B230/B300 battery?

  No.

• Is the solar charge controller mode MPPT or PWM?

  MPPT.

Reviews

Write a product review

Warranty

Warranty Period: 2 Years

Warranty Details: Please CLICK HERE for Warranty Information on this product

Delivery

• We ship Australia-wide with national road express freight companies such as Star Track, TNT and Toll.
• Small Items are sent with Australia Post via regular post.
• Delivery times are generally 3-5 days from day of dispatch for major cities (sometimes quicker). Please allow longer for regional and remote areas.
• Once your item(s) have been dispatched, we will provide you freight tracking information so you can track your delivery to your door.
• Items are fully insured during the freight process.
• Unfortunately we cannot deliver to PO Boxes.
• For further details on our Delivery Process you can visit our Delivery Page HERE.