Carefree 14' Eclipse 12V Silver Shale Fade Awning. FM146D00

Carefree Awning Hardware 12V Eclipse

Carefree Awning Hardware 12V Eclipse, is what you’ll need if you’re installing a new Carefree Eclipse 12V Awning.

12V Awning arms to suit the Eclipse awning. Must be fitted to a flat-walled caravan or motor home, it is 10.8cm wide & requires 1.8mt from the awning rail to the floor line.

If you'd like to know more about why Carefree Awnings and Hardware a good choice, see our Carefree Eclipse Awnings page.

Specifications

• Includes: Awning Hardware only (awning not included)
• Suits:   Caravans or Motorhomes with a flat wall AND 1.8mt from the awning rail to the floor line.
• Colour: White
• Power: 12V
• Dimensions: 10.8cm Wide
• NOTE: Awning NOT included. See SKU: Carefree_Eclipse_Awnings_VAR in our Recommended Products for awnings suitable for this hardware.

CAREFREE ALTITUDE BT-12 MOTION SWITCH

A motion switch to suit the Carefree Altitude. This switch on the awning is used to detect unwanted motion, like extra wind. It then instructs the awning to automatically retract if it detects.

*This model (R060808-001) replaces the old model (R060784-001)

Peggy Peg Standard Plastic Screw-in-Peg, 200mm, Pack of 12

All our Peggy Peg plastic screw-in pegs are produced from Fibre-glass reinforced UV-resistant polyamide. At first sight, the colour may seem a bit odd, but our Peggy Pegs can be seen more quickly. Peggy N is the height-adjustable all-purpose Peggy Peg for awnings, cords and tents etc. Product testers travelling all around Europe have approved that Peggy N can be used in 90% of all cases by its height adjustment. Pre-drilling might be useful in hard or frozen grounds (take a 10 mm drill). Attention: Only continue to drill with all our Peggy Pegs as long as the screw is driving in.

Benefits:

• Application: From normal or hard grounds to soft grounds.
• Screws into ca. 90% of all grounds (tested).
• All-rounder screw-in peg for many types of applications.
• 1/5 of the weight compared to a common peg.

Product Includes:

• 12 x Screw-in pegs - color: orange N 20cm
• 12 x Hooks N - color: blue

Specifications:

• Material: PA with fibreglass
• Length: 20cm
• Wrench size: 17mm
• Torque: max. 25Nm
• Weigth: 0.40grams

Peggy Peg Fix & Go Anchor Plate

Even though the weather seems to be good, an awning should always be fixed tightly to the ground. The awarded Fix&Go Anchor Plate 2.0 will be a perfect solution.
While setting up your awning you simply put each leg in one of our Fix&Go Anchor Plate 2.0 and lock them in position. Secure the plates with a few Peggy screw-in pegs - ready.
The advantage of this Anchor Plate is that you can quickly retract the awning legs again by only opening the sliders. If you need some shade again you simply extend the awning and secure the awning legs back into the still secured Fix&Go Anchor Plates. Plate and locks were designed to suit almost every kind of awning and tent poles. (Fiamma, Thule Omnistor, regular tent poles up to 25mm) With the two orange sliders, you can quickly secure or unblock in just seconds. You can use every screw-in peg of the whole Peggy Peg range to fix the plate.

Unlike normal tent pegs, Peggy Pegs promote maximum holding in vertical movement due to the thread of the pegs as well as in horizontal directions. Used together with the Fix&Go Anchor Plate 2.0, this allows for excellent security of your awning as well as a piece of mind. So when the afternoon breeze picks up, you can be happy that your awning legs will remain firmly on the ground!

Peg&Stop screw-in pegs work on almost every ground in combination with their locknuts. The flat Fix&Go Plate offers a bigger area of support! In combination with two, Peggy L screw-in pegs awning legs or tent poles won't sink on sandy ground/beaches.

• Awning legs or tent poles are securely fixed and won't sink into the ground or lift off.
• Retraction of your awning is possible at any time.
• Simple secure or unblock via the orange Fix&Go sliders.
• Excellent security of your awning as well as a piece of mind!
• Compatible with every Peggy Peg

Includes:

• 1 x Fix&Go Plate
• 1 x Storm hook

Specifications:

• Material: PA with fibreglass
• Length: 15 cm
• Weight: 0,284 kg 

Peggy Peg Tie Strap

The TieStrap is a wise extension for every awning owner. The bright coloured Strap is adjustable between 1,5-3 metres without having any loose cord ends. Our TieStrap is perfect for storm anchoring purposes for almost every awning in the market. It’s also possible to use it for tents or sun sails. Peggy TieStrap is also necessary when you want to attach side elements to the awning while using our Fix&Go AntiFlap.

Practical advice: When the Peggy Peg is securely screwed into the ground, simply attach the spring via the hook the peg - ready! 
Suitable for Peggy N, L, LA, HC and anchoring plates and Anchor Plates (optionally available). Recommended extensions: Fix&Go Storm Anchor Set and Fix&Go Anchor Plates

Benefits:

• Adjustable strap (1,5 - 3 Meter).
• Incorporated spring system allows for tension relief.
• No loading of the awning leg joints.
• Suitable for Screw-in pegs N, L, LA, HC.
• Suitable for Kings, Dune, XTM, A.R.B., Supa peg, Fiamma, Carefree, Thule, Aussie Traveller, Dometic, 23Zero, Ironman 4x4, Nomad by CAOS etc. 
• Product contains:
• 1 x TieStrap with incorporated relieving springs 
• (we advise two for a standard sized awning)
• 1 x T-Connector 6 mm in its diameter 

Specifications:

• Length: 1,5 - 3 Meter
• Weigth: 0,260kg