EcoFlow Smart 1800W Petrol Inverter Generator

Specifications

SKU EFGASGEN4L

Brand EcoFlow

GTIN 4897082664963

Product Category Inverter Generators

Maximum Output (Watts) 1800

Dimensions 597 x 296 x 475mm

Weight (kg) 29.3

Continuous Output (Watts) 1900

NOTE: see full product specifications & further product info in the Description section on this page.

Q & A

---

• Can it be used indoor?

  Like any gas generator, it must be placed outside 15 feet from doors and windows to prevent carbon monoxide poisoning. The Smart Generator automatically shuts off if it detects dangerous carbon-monoxide levels, but isn't a substitute for having CO detectors in other parts of your house.

• What fuel does it use?

  Unleaded gasoline.

• What is the noise level?

  The operational volume of the Smart Generator is 56 to 67dB at 7 meters, which is similar to office noise or a conversation.

• How do I check the Spark Plug?
  1. Turn the maintenance cover knob to OPEN and take off the maintenance cover.
  2. Take off the spark plug cap.
  3. Use the spark plug socket and turn it counterclockwise to remove the
  4. spark plug.
  5. Check for any color fading and remove any carbon deposits. The porcelain center around the spark plug center electrode should be moderately light brown if it is in good condition.
  6. Check the model of the spark plug and that it has sufficient clearance.
• How do I maintain the Muffler?
  1. Unscrew the bolts.
  2. Take off the muffler cap, muffler block, and spark plug arrestor.
  3. Clean the carbon deposits on the muffler block and the spark plug arrestor gently with a wire brush to avoid damaging or scratching the muffler block and spark plug collector.
  4. Check whether the muffler block or the spark plug arrestor is damaged, and replace it if damaged.
  5. Reinstall the parts in order.
• How do I maintain the Fuel Filter Strainer?
  1. Take off the fuel cap and fuel filter screen.
  2. Clean the fuel filter screen with fuel.
  3. Wipe the filter screen and place it back into the fuel.
  4. Reinstall the fuel cap.
• How do I maintain the Air Filter?
  1. Turn the maintenance cover knob to Open and take off the maintenance cover.
  2. Take off the screws and the air filter cover.
  3. Take off the foam filter element.
  4. Clean the foam filter element with soapy water or a nonflammable solvent and let it dry.
  5. Add oil to the foam filter element and squeeze out excess oil. The foam filter element should be wet but not drenched.
  6. Place the foam filter element into the air filter. Note: Make sure that the surface of the foam filter element is in close contact with the air filter, leaving no gap between them. Do not start the generator before reinstalling the air filter as excessive toxic gas may be produced and wear down the engine block.
  7. Install the air filter cover back to its original position and tighten the screws.
  8. Reinstall the maintenance cover and turn the knob to Closed.
• How do I replace the Engine Oil?
  1. Place the Generator on a level surface, start it up, and keep it running for several minutes to warm it up. Turn off the Generator and turn the Engine Switch and the fuel cap breather knob to OFF.
  2. Turn the maintenance cover knob to Open and take off the maintenance cover.
  3. Unscrew the lid and dipstick.
  4. Place the oil basin under the Generator and tilt the unit so that the oil will drain quickly. If you replace the engine oil yourself, please dispose of the used oil properly. Store the used oil in a sealed container and take it to your nearest oil recycling center. Do not pour it into any trash can, onto the ground, or into the sewer. Note: Improper disposal of engine oil may harm the environment.
  5. Place the Generator in its original horizontal state.
  6. Refill the oil to the proper level. 7. Wipe the dipstick clean and remove any spilled oil. Prevent any foreign objects from entering the engine.
  7. Tighten the dipstick and lid.
  8. Reinstall the maintenance cover and turn the knob to Closed.

   

   

   

   

   

   

   

• Can I adjust the Carburetor?

  The carburetor is an essential part of the engine and should be adjusted by a dealer with professional knowledge, data, and equipment.

  Changing the carburetor when working at high altitudes: The atmospheric pressure may reduce the amount of air that carburetors intake when running in high-altitude areas. This may cause its performance to decline and increase fuel consumption.

  It may also affect the spark plug and make the engine hard to start. If at an altitude different from when the engine was certified, emissions may increase over an extended running time.

  Modifying the carburetor may improve its high-altitude performance. If you continuously operate your generator above 3281 feet (1000 meters), contact your after-sales service dealer, who can modify the carburetor.

• I think there might be an Internal Battery Issue?

  Turn the maintenance cover knob to open, take off the maintenance cover and check whether the positive and the negative wires of the battery are connected correctly.

• How do I fix an engine oil issue?

  Check for oil leaks.

  Check the oil level:

  • Unscrew the lid, take out the dipstick and wipe it clean.
  • Put the dipstick back without screwing it in, and check the oil level.
  • Add oil if the oil level is low.
  • Screw the dipstick and lid back in firmly.
• How do I fix a fuel issue?

  Take off the fuel cap and check the fuel level. Add more fuel if the fuel level is too low.

• Can I Connect Devives to the AC Output Outets Before Starting the Generator?

  Do not plug in any devices before starting the Smart Generator.

• How to Connect the Smart Generator's Internal Battery?

  The generator cannot be started by the Electric Start button unless the internal battery is connected. Turn the maintenance cover knob to OPEN, take off the maintenance cover and connect the positive and the negative wires of the battery.

• How to Add Generator Engine Oil?

  The Generator does not come with oil and needs to be filled before use. Do not tilt the Smart Generator when adding oil to prevent damaging the unit with excess oil.

• How to Refuel the Smart Generator?

  Do not overfill the fuel tank, as fuel may expand and spill out when the fuel tank warms up. Be sure to close the fuel cap tightly after refueling.

• How many times will the smart generator charge the Delta Pro or the Delta Max in one full tank?

  Smart Generator can recharge Delta Pro 1.2 times, or Delta Max 2.4 times.

• Can I Charge Other Devices While Charging DELTA Pro/Max?

  Yes, you can use the AC and DC outlets while recharging DELTA Max or DELTA Pro.

Reviews

Warranty

Warranty Period: 1 Year

Warranty Details: Please CLICK HERE for Warranty Information on this product

Delivery

• We ship Australia-wide with national road express freight companies such as Star Track, TNT and Toll.
• Small Items are sent with Australia Post via regular post.
• Delivery times are generally 3-5 days from day of dispatch for major cities (sometimes quicker). Please allow longer for regional and remote areas.
• Once your item(s) have been dispatched, we will provide you freight tracking information so you can track your delivery to your door.
• Items are fully insured during the freight process.
• Unfortunately we cannot deliver to PO Boxes.
• For further details on our Delivery Process you can visit our Delivery Page HERE.