Enerdrive ePRO Combi 3000W Inverter Charger
SKU: EPC-3000-12-KIT Learn More»
FREE SHIPPING
This item is sent via Express Courier. All freight is fully insured.
Accessories List:
Description
Enerdrive ePRO Combi 3000W Inverter Charger
The Enerdrive ePRO Combi inverter charger is designed to run high amp drawing appliances like your Caravan Air Conditioner from your battery system. The high output inverter can supply 2600w - 3200w of power which is ample to run most caravan appliances - even at the same time. The inbuilt charger will deliver up to 120amps per hour back into your batteries at the same time. It will act as an uninterruptible AC power supply (UPS) switching between 240v mains, generator or 12v battery supplied power without causing damage to delicate electronics like TV's and laptop computers. The benefit of having this unit as a combination is the convenience of easy installation and the space you will save when mounting into tight spaces like Caravans, Boats and RV's.
Features:
- AC Input Power Boost – The ePRO Combi is capable of temporarily assisting weak AC input sources when more power is needed than available (i.e. from small generators). This is beneficial when larger loads than both the generator or the inverter on their own could support; so let the ePRO Combi combine both of the AC sources for maximum load support capability.
- AC Input Current Limit – For those times when you have limited AC supply (i.e. portable generators), you can set the ePRO Combi to only charge at a maximum rate.
- Alarm Output Relays – Providing full configuration options for the alarm contacts PLUS convert external trigger commands into a number of ePRO Combi status changes.
- Also available on the larger 2000-3500w Combi’s are two fully configurable 16A 230v alarm relay outputs for controlling large AC loads like air conditioning. Along with two unique trigger inputs, it gives the end user virtually unparalleled control of their Enerdrive ePRO “Power Station”.
Universal Remote Control
The Universal Remote Control (URC) can be used to remotely readout all available parameters from your ePRO inverter/charger Combi, like charging current, output voltage, charge stage etc. It is also possible to put the Combi in standby mode or to wake it up again, besides being able to control the maximum charge current and the maximum AC input current. All information is shown on a clear white backlit graphical display. This kit comes with mounting screws and a 3 meter interface cable (standard cat5 patch cable). The URC automatically recognises to which type of equipment it is connected.
| Model | EPC 2000-12 | EPC 3000-12 | EPC 3500-24 |
|---|---|---|---|
| Output power (1) Pnom | 1800W | 2600W | 2800W |
| P10minutes | 2100W | 3200W | 3800W |
| Psurge | 4000W | 5000W | 6500W |
| Output voltage / frequency | 230 Vac ± 2% / 50 Hz ± 0.05% | ||
| Output waveform | 230 Vac ± 2% / 50 Hz ± 0.05% | ||
| Input voltage (± 3% tolerance): Nominal | 12V | 12V | 24V |
| Range | 10.5 (2) – 16 Vdc | 10.5 (2) – 16 Vdc | 21 (2) – 32 Vdc |
| Maximum efficiency | 92% | 92% | 93% |
| No load power consumption (2) [ASB] | <20 W [3.5 W] | <20 W [3.5 W] | <20 W [4.0 W] |
| Charger stage | |||
| AC input voltage | 185 – 270 Vac / 45 – 65 Hz / PF > 0.95 | ||
| Maximum continuous charging current (4) | 80A | 120A | 70A |
| Standard charge voltage (bulk / float @ 25°C) | 14.3V / 13.3V (programmable) | 14.3V / 13.3V (programmable) | 28.6V / 26.6V (programmable) |
| Charge algorithm | IUoUoP, intelligent 4-stage, temperature compensated (programmable) | ||
| AC Transfer Switch | |||
| Maximum continuous current | 30 Ams | ||
| Transfer time (typical) | 0 ms (inverter to mains) / <5 ms (mains to inverter) | ||
| General | |||
| ePROLink enabled | Yes | ||
| Protections | high/low battery voltage, high temperature, overload, short circuit, high ripple voltage and low AC input voltage | ||
| DC connections | M10 bolt terminals | ||
| AC connections | Screw terminals | ||
| Enclosure body size | 370 x 431 x 132mm | ||
| Total weight | 18.5 Kg | ||
| Protection class / operating temp. / storage temp. | IP21 / -20°C.. +50°C / -40°C.. +80°C (humidity max. 95% non-condensing) | ||
| Standards | Complies with IEC 60335-2-29 including Australian deviations. | ||
| Note: Specifications subject to change without notice. | |||
|
|||
Specifications
SKU EPC-3000-12-KIT
Brand Enerdrive
GTIN 9342616017098
Product Category Power Inverter Chargers
Voltage 12V
Wattage (W) 3000
Input Voltage 12V DC
Dimensions 370 x 431 x 132mm
Peak Power (W) 5000
Weight (kg) 18.5
NOTE: see full product specifications & further product info in the Description section on this page.
Q & A
-
Can these chargers take solar input?
No, the battery charging component is an AC input, meaning only AC power (mains power) can charge through this unit.
Reviews
Be The First To Review This Product!
Help other CARAVANRVCAMPING users shop smarter by writing reviews for products you have purchased.
Warranty
Warranty Period: 5 Years
Warranty Details: Please CLICK HERE for Warranty Information on this product
Delivery
- We ship Australia-wide with national road express freight companies such as Star Track, TNT and Toll.
- Small Items are sent with Australia Post via regular post.
- Delivery times are generally 3-5 days from day of dispatch for major cities (sometimes quicker). Please allow longer for regional and remote areas.
- Once your item(s) have been dispatched, we will provide you freight tracking information so you can track your delivery to your door.
- Items are fully insured during the freight process.
- Unfortunately we cannot deliver to PO Boxes.
- For further details on our Delivery Process you can visit our Delivery Page HERE.
