Fiamma F45 S 3.0m Deep Black Casette / Royal Grey Fabric Box Awning, 06759A01R

FIAMMA AWN VWT4 FITTING BRACKETS FOR F45. 98655-292

Fiamma F45 awning bracket kit to suit VW T4 & VW T4 with a Lift Roof. 

Features:

• Kit comprises of 2 x 8cm brackets
• Drilling required

FIAMMA AWN "VAN" FITTING BRACKETS FOR F45. 98655-017

Fiamma F45 awning bracket kit suitable for vans such as Fiat Ducato (manufactured before 1994), Ford Transit and Mercedes Sprinter 208D KB. Fiamma have a range of adapter brackets allowing you to fit an F45 awning to your RV. Kit comes with x2 types of brackets (x2 of each supplied), one suits Fiat Ducato (manufactured before 1994); the other suits Ford Transit, Mercedes Sprinter 208D KB.

Features:

• Brackets are 8cm in length
• Drilling required

FIAMMA AWNING FIX INSTALL BRACKET

Suitable for RV's with a flat outer wall. An optional extra bracket for those who wish to strengthen their current mounting. Drilling required. Kit comprises of x1, 12cm "S" bracket.

FIAMMA AWNING RAIN GUARD 

Fiamma awning rain guard is a great solution tp help prevent watter dripping behind the space where your awning has been mounted. Suited to awnings that have been fitted using one of the adaptor brackets that resulte in a small gap up to 9cm between awning case and the RV wall. Can be installed without removing the awning.

Specs:

• Dimensions: 550cm Long x 9cm Wide
• Sold per Metre

FIAMMA AWNING RAIN GUARD 

Fiamma awning rain guard is a great solution tp help prevent watter dripping behind the space where your awning has been mounted. Suited to awnings that have been fitted using one of the adaptor brackets that resulte in a small gap up to 4cm between awning case and the RV wall. Can be installed without removing the awning.

Specs:

• Dimensions: 550cm Long x 4cm Wide
• Sold per Metre

FIAMMA Awning Rain Guard S 550cm Length. 98655Z014

Convenient rubber guard to seal the space between the awning and the vehicle wall to prevent water infiltration.

FIAMMA AWN VWT2/T3 FITTING BRACKETS FOR F45. 98655-035

• Kit VW T3 - for models after 1980 before 1991
• Black finish brackets
• 2 piece - 8 cm brackets

FIAMMA AWN "MULTI" INSTALL BRACKET (1KIT). 98655-011

• Kit for Fiamma awnings for multi use
• 1 piece - 8 cm bracket
• Bracket is designed to compensate for the curved vehicle roof - suits:
  • Renault Master 98
  • Fiat Ducato
  • Citroen Jumper
  • Peugeot Boxer

FIAMMA VWT5 TRANSPORTER MULTIVAN UK. 98655-648

• Kit VW T5/T6 (Multivan/Transporter) - for right hand drive
  • After 2003 models
• 2 piece - 21.5 cm brackets

FIAMMA "KIT S 400" AWNING INSTALL BRACKET. 98655-381

• 1 piece - 40cm bracket

Peggy Peg Standard Plastic Screw-in-Peg, 200mm, Pack of 12

Peggy Peg Screw-in pegs proven a million times, the smartest way to tie down!

• Five times lighter than an equivalent metal peg. Ten times better grip!
• Generous thread for a secure grip. Ideal for soft, sandy soils!
• Can also be used in hard, rocky grounds by using the height-adjustable hooks or Lock Nut!
• Robust, fibre-glass, UV-resistant polyamide or Aluminium!
• Quick and easy to use!
• When it's time to go, just screw it out-it's that easy!

All our Peggy Peg plastic screw-in pegs are produced from Fibre-glass reinforced UV-resistant polyamide. At first sight, the colour may seem a bit odd, but our Peggy Pegs can be seen more quickly. Peggy N is the height-adjustable all-purpose Peggy Peg for awnings, cords and tents etc. Product testers travelling all around Europe have approved that Peggy N can be used in 90% of all cases by its height adjustment. Pre-drilling might be useful in hard or frozen grounds (take a 10 mm drill). Attention: Only continue to drill with all our Peggy Pegs as long as the screw is driving in.

Benefits:

• Application: From normal or hard grounds to soft grounds.
• Screws into ca. 90% of all grounds (tested).
• All-rounder screw-in peg for many types of applications.
• 1/5 of the weight compared to a common peg.

Product Includes:

• 12 x Screw-in pegs - color: orange N 20cm
• 12 x Hooks N - color: blue

Specifications:

• Material: PA with fibreglass
• Length: 20cm
• Wrench size: 17mm
• Torque: max. 25Nm
• Weigth: 0.40grams

Peggy Peg Fix & Go Anchor Plate

Even though the weather seems to be good, an awning should always be fixed tightly to the ground. The awarded Fix&Go Anchor Plate 2.0 will be a perfect solution.
While setting up your awning you simply put each leg in one of our Fix&Go Anchor Plate 2.0 and lock them in position. Secure the plates with a few Peggy screw-in pegs - ready.
The advantage of this Anchor Plate is that you can quickly retract the awning legs again by only opening the sliders. If you need some shade again you simply extend the awning and secure the awning legs back into the still secured Fix&Go Anchor Plates. Plate and locks were designed to suit almost every kind of awning and tent poles. (Fiamma, Thule Omnistor, regular tent poles up to 25mm) With the two orange sliders, you can quickly secure or unblock in just seconds. You can use every screw-in peg of the whole Peggy Peg range to fix the plate.

Unlike normal tent pegs, Peggy Pegs promote maximum holding in vertical movement due to the thread of the pegs as well as in horizontal directions. Used together with the Fix&Go Anchor Plate 2.0, this allows for excellent security of your awning as well as a piece of mind. So when the afternoon breeze picks up, you can be happy that your awning legs will remain firmly on the ground!

Peg&Stop screw-in pegs work on almost every ground in combination with their locknuts. The flat Fix&Go Plate offers a bigger area of support! In combination with two, Peggy L screw-in pegs awning legs or tent poles won't sink on sandy ground/beaches.

• Awning legs or tent poles are securely fixed and won't sink into the ground or lift off.
• Retraction of your awning is possible at any time.
• Simple secure or unblock via the orange Fix&Go sliders.
• Excellent security of your awning as well as a piece of mind!
• Compatible with every Peggy Peg

Includes:

• 1 x Fix&Go Plate
• 1 x Storm hook

Specifications:

• Material: PA with fibreglass
• Length: 15 cm
• Weight: 0,284 kg 

Peggy Peg Tie Strap

The TieStrap is a wise extension for every awning owner. The bright coloured Strap is adjustable between 1,5-3 metres without having any loose cord ends. Our TieStrap is perfect for storm anchoring purposes for almost every awning in the market. It’s also possible to use it for tents or sun sails. Peggy TieStrap is also necessary when you want to attach side elements to the awning while using our Fix&Go AntiFlap.
The Peggy TieStrap slides into the awning rails with the enclosed T‐Connector and is then anchored to the ground with a Peggy Peg or the u-shaped steel hook of the Anchor Plate 1.0 or 2.0. The incorporated relieving springs absorb a huge part of the wind power. Such a spring system is used for the first time in the European camping market and allows the strap to be flexible in the wind even if there is too much pressure. The TieStrap should be stretched away from the vehicle. This brings the advantage compared to a normal Storm Strap as it distributes the wind power to the whole length of the robust front aluminium bar. Clever solution: All our Peggy Peg sizes fit through the loop of the spring. This results in continuous tensioning - even if the strap is not properly tensioned, no part can unhook.

Practical advice: When the Peggy Peg is securely screwed into the ground, simply attach the spring via the hook the peg - ready! 
Suitable for Peggy N, L, LA, HC and anchoring plates and Anchor Plates (optionally available). Recommended extensions: Fix&Go Storm Anchor Set and Fix&Go Anchor Plates

Benefits:

• Adjustable strap (1,5 - 3 Meter).
• Incorporated spring system allows for tension relief.
• No loading of the awning leg joints.
• Suitable for Screw-in pegs N, L, LA, HC.
• Suitable for Kings, Dune, XTM, A.R.B., Supa peg, Fiamma, Carefree, Thule, Aussie Traveller, Dometic, 23Zero, Ironman 4x4, Nomad by CAOS etc. 
• Product contains:
• 1 x TieStrap with incorporated relieving springs 
• (we advise two for a standard sized awning)
• 1 x T-Connector 6 mm in its diameter 

Specifications:

• Length: 1,5 - 3 Meter
• Weigth: 0,260kg