Peggy Peg Large Aluminium Screw-in-Peg, 310mm, Pack of 2

Peggy Peg Fix & Go Anchor Plate

Even though the weather seems to be good, an awning should always be fixed tightly to the ground. The awarded Fix&Go Anchor Plate 2.0 will be a perfect solution.
While setting up your awning you simply put each leg in one of our Fix&Go Anchor Plate 2.0 and lock them in position. Secure the plates with a few Peggy screw-in pegs - ready.
The advantage of this Anchor Plate is that you can quickly retract the awning legs again by only opening the sliders. If you need some shade again you simply extend the awning and secure the awning legs back into the still secured Fix&Go Anchor Plates. Plate and locks were designed to suit almost every kind of awning and tent poles. (Fiamma, Thule Omnistor, regular tent poles up to 25mm) With the two orange sliders, you can quickly secure or unblock in just seconds. You can use every screw-in peg of the whole Peggy Peg range to fix the plate.

Unlike normal tent pegs, Peggy Pegs promote maximum holding in vertical movement due to the thread of the pegs as well as in horizontal directions. Used together with the Fix&Go Anchor Plate 2.0, this allows for excellent security of your awning as well as a piece of mind. So when the afternoon breeze picks up, you can be happy that your awning legs will remain firmly on the ground!

Peg&Stop screw-in pegs work on almost every ground in combination with their locknuts. The flat Fix&Go Plate offers a bigger area of support! In combination with two, Peggy L screw-in pegs awning legs or tent poles won't sink on sandy ground/beaches.

• Awning legs or tent poles are securely fixed and won't sink into the ground or lift off.
• Retraction of your awning is possible at any time.
• Simple secure or unblock via the orange Fix&Go sliders.
• Excellent security of your awning as well as a piece of mind!
• Compatible with every Peggy Peg

Includes:

• 1 x Fix&Go Plate
• 1 x Storm hook

Specifications:

• Material: PA with fibreglass
• Length: 15 cm
• Weight: 0,284 kg 

Peggy Peg Tie Strap

The TieStrap is a wise extension for every awning owner. The bright coloured Strap is adjustable between 1,5-3 metres without having any loose cord ends. Our TieStrap is perfect for storm anchoring purposes for almost every awning in the market. It’s also possible to use it for tents or sun sails. Peggy TieStrap is also necessary when you want to attach side elements to the awning while using our Fix&Go AntiFlap.
The Peggy TieStrap slides into the awning rails with the enclosed T‐Connector and is then anchored to the ground with a Peggy Peg or the u-shaped steel hook of the Anchor Plate 1.0 or 2.0. The incorporated relieving springs absorb a huge part of the wind power. Such a spring system is used for the first time in the European camping market and allows the strap to be flexible in the wind even if there is too much pressure. The TieStrap should be stretched away from the vehicle. This brings the advantage compared to a normal Storm Strap as it distributes the wind power to the whole length of the robust front aluminium bar. Clever solution: All our Peggy Peg sizes fit through the loop of the spring. This results in continuous tensioning - even if the strap is not properly tensioned, no part can unhook.

Practical advice: When the Peggy Peg is securely screwed into the ground, simply attach the spring via the hook the peg - ready! 
Suitable for Peggy N, L, LA, HC and anchoring plates and Anchor Plates (optionally available). Recommended extensions: Fix&Go Storm Anchor Set and Fix&Go Anchor Plates

Benefits:

• Adjustable strap (1,5 - 3 Meter).
• Incorporated spring system allows for tension relief.
• No loading of the awning leg joints.
• Suitable for Screw-in pegs N, L, LA, HC.
• Suitable for Kings, Dune, XTM, A.R.B., Supa peg, Fiamma, Carefree, Thule, Aussie Traveller, Dometic, 23Zero, Ironman 4x4, Nomad by CAOS etc. 
• Product contains:
• 1 x TieStrap with incorporated relieving springs 
• (we advise two for a standard sized awning)
• 1 x T-Connector 6 mm in its diameter 

Specifications:

• Length: 1,5 - 3 Meter
• Weigth: 0,260kg 

Peggy Peg Hardcore Combo Tool

An adapter made of aluminium. Although the plastic adaptor is sufficient for the correct torque setting, it was just a logical step to design one for the Hardcore Peggy Line. The Alloy Tool is available individually to upgrade your system and is of course compatible with the T-Handle of the Combi-Tools made of polyamide.

Benefits:

• Reinforced Adapter made of aluminium to withstand the required power when using our Hardcore Pegs.
• Tool in two parts to be used either manually or with an electric drill.
• Fits all Peggy Peg's

Includes:

• 1 x Alloy Tool Adapter
• 1 x Adapter 

Specifications:

• Material: Aluminium
• Wrench size: 17mm
• Weight: 0,078kg