Renogy 12V 170Ah Lithium-Iron Phosphate Battery

Renogy DCC50S 12V 50A Dual Input DC to DC Battery Charger with MPPT

Renogy's DC to DC MPPT on-board Battery Charger is designed to give you options! This multi-stage, multi-input battery charger can charge a service battery from a starting battery linked to an alternator or by utilizing solar panels connected directly to the unit. While your vehicle's alternator prioritizes your starting battery, this unit will allow your solar system to charge your service battery first! It's the smart way to keep yourself fully charged and off-grid longer! And with multi-stage charging and multi-chemistry functionality, Renogy's DC to DC MPPT Charger has you covered whether you're using Flooded, Gel, AGM, or Lithium batteries. With RJ45 communication port featured, you can unlock monitoring features exclusively using the BT-2 Bluetooth Module and Renogy DC Home App, control and monitor the device remotely through your phone in real time.

Features:

• Multi-Input Efficiency Charging: The Renogy DC-DC Battery Charger with unique dual charging options. This multi-stage, multi-input battery charger can charge the house battery from a starter battery linked to the car alternator or by utilizing solar panels connected directly to the unit. Both ways can be charged at the same time to minimize charging time. With up to 99% MPPT tracking efficiency and 94% convert efficiency, the charger can fully charge a 1kWh battery within 2 hrs with solar energy.

• Ingenious Structure Design: Removable side covers avoid contact between product terminals and the human body during transportation and daily use, which results in electrostatic damage, ensuring product stability and safety. The all-in-one NEG- terminal with partition design integrates the terminals for solar panels, the array starter battery, and the house battery, avoiding misconnection and making the simple installation.

• Diversified Smart Monitoring: The Renogy 50A DC-DC Battery Charger uses the Modbus protocol and allows it to be compatible with various monitoring devices, including the RMS-DCDC monitoring screen, DC Home App, and Renogy One integrated screen. Managing and monitoring your energy easily and remotely in any scenario and situation.

• Soft Start Circuit Design: The voltage at the input end of the Renogy 50A DC-DC battery charger will be rising gently, intending to avoid when the vehicle alternator starts, the instantaneous overvoltage which may cause damage to the battery charger or cause the starter battery to over-discharge and due to the vehicle can not start.

• Comprehensive Security Assurance: The Renogy DC-DC Battery Charger is multi-certified to CE, FCC, and PoHs. This high-quality battery charger has multiple intelligent protections including battery isolation, over-voltage protection, battery temperature protection, over-current protection, overheat protection, reverse current protection, solar panel and alternator reverse polarity protection, guaranteeing charging safety and protecting your batteries.

Specifications:

• System Voltage : 12VDC    
• Battery Voltage Range : 9-16VDC
• Maximum Charging Current  : 50A    
• Battery Type : SLD/AGM, GEL, FLD, LISER
• Service Battery Charging Mode: MPPT    
• Charging Efficiency: Up to 97%
• Max. Solar Input Voltage: 25V    
• Maximum Solar Input Power: 660W
• Alternator Input Voltage: Traditional Alternator: 13.2-16VDC
• Smart Alternator (Euro 6): 12-16VDC    
• Maximum Alternator Input Power: 660W
• Self-consumption: 60mA    
• Operating Temperature Range: -31°F ~ 149°F 
• Communication Protocol: RS485    
• Ground Type: Negative
• Terminal Size:M8*1.25 - 10mm    
• Temperature Compensation: '-3mV/C/2V
• Storage Temperature Range: -40°F - 176°F    
• Operating / Storage Humidity: 0%-95%, No Condensation
• Dimensions : 244mm x 146mm x  77mm
• Weight: 1.42 kg

Pack Included:

• 12V 50A DC-DC On-Board Battery Charger with MPPT
• Battery Temperature Sensor
• IGN Signal Wire
• RS485 Communication Cable

Optional Accessories:

• Renogy BT-2 Bluetooth Module
• Monitoring Screen

Renogy 12V 20A AC to DC Lithium Iron Phosphate Battery Charger

Renogy 12V 20A AC charger is designed for lithium batteries (LifePO4 Battery). The charger has a 3-stage intelligent charging design (CC/CV/trickle) to ensure it charges the lithium battery quickly and efficiently. This battery charger has 5-layer protection functions to realize comprehensive monitoring and protection of the battery. This charger is suitable for RVs, motorbikes, boats, and camper-van.

Features:

• Born for Lithium Batterie: This battery charger is designed for lithium batteries. When the lithium battery triggers the low temperature/low voltage while charging, the BMS will turn on the protection, which means the lithium battery cannot be charged and needs to be activated. This charger provides a lithium battery activation function that quickly exits the protection mode and recharges. Along with CE and UKCA certification, it provides a safe and stable AC charging environment.

• Strong Adaptability: This battery charger has a wide AC input voltage range, 100-240 VAC 50/60Hz, which is compatible with various needs. The charger comes with an alligater clip battery charging cable which is designed to allows users to quickly establish the connection between the battery and the charger.

• Smart Charging: The charger has a 3-stage intelligent charging design: high current (cc), constant voltage (cv), trickle. It can accurately identify battery voltage and automatically switch charging mode and provide fast and efficient charging for lithium batteries; the charger's efficiency can reach up to 92%.

• Build-in Safety Protection: The charger has five built-in protection functions to ensure charging safety, including short circuit protection, over-current protection, over-voltage protection, under-voltage protection, and reverse polarity protection. The charger's indicator light can remind the wrong charging status and achieves all-around monitoring and protection.

• Easy to Use:  3-quick-step to quickly establish the connection of battery and charger, the steps are as follows:

  • 1. Connect the negative output terminal of the charger to the negative terminal of the battery

  • 2. Connect the positive output terminal of the charger to the positive terminal of the battery

  • 3. Connect the AC Charger Power Adapter Cable to the AC port of the charger

Specifications:

• Input Voltage: 100-240 VAC ~ 50/60Hz    
• Input Amps: 5A Max
• Output Voltage: 14.5 ± 0.1 VDC    
• Output Amps: 20A
• Minimum Battery Voltage: 8V
• Efficiency: 93%
• Operating temperature range: -29°C~45°C
• Storage Temperature: -40°C~75°C
• Self-Consumption: 50mA    
• Current Protection: 250V 10A Fuse built in
• Dimensions: 233mm x 108mm x 64mm    
• Weight: 1.7kg
• Cable Length: Approx 39in / 99cm    
• Cable Gauge: 12 AWG
• Protection: Overcurrent Protection (Fuse 250V 10A), Short Circuit Protection    
• Certifications: CE, ETL, FCC, TUV