Victron Phoenix Inverter 12V / 800VA VE.Direct AU/NZ
SKU: PIN121801300 Learn More»
FREE SHIPPING
This item is sent via Express Courier. All freight is fully insured.
Accessories List:
Description
Victron Phoenix Inverter 12/800 VE.Direct AU/NZ
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.
Specifications:
| Wattage | 650W |
|---|---|
| Peak Power | 1500 |
| Output Voltage and Frequency | 110 VAC or 230 VAC +/- 3% | 50 Hz or 60 Hz +/- 0,1% |
| Protection | a) output short circuit, b) overload, c) battery voltage too high, d) battery voltage too low, e) temperature too high |
| Input Voltage | 9,2 - 17V |
| Battery Low Alarm Protection | 10.9V |
| Battery Low Shutdown Protection | 9.3V |
| Operating Temperature Range | -40 to +50°C (fan assisted cooling) |
| Humidity | max 95% |
| Dimensions (LxWxH) mm | 305 x 216 x 105 |
| Battery-connection | Screw terminals |
| Protection category | IP 21 |
| Efficiency | 90% |
| Net Weight (kg) | 5.5 Kg |
Features:
- Low voltage alarm trip and reset levels
- Low voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage 210 - 245V
- Frequency 50Hz or 60Hz
- ECO mode on/off and ECO mode sense level
- In- and output voltage and alarms
Specifications
SKU PIN121801300
Brand Victron
GTIN 8719076055051
Product Category Power Inverters
Voltage 12V
Wattage (W) 650
Dimensions 305 x 217 x 105mm (WxHxD)
Peak Power (W) 1500
Weight (kg) 5.5
NOTE: see full product specifications & further product info in the Description section on this page.
Q & A
-
Can I run an inverter from AGM or Gel batteries?
The short answer is yes. People have been running 240V inverters from AGM batteries long before lithium was around. But people have traditionally used a lot lower AC current devices when caravan and camping than they do today.
Inverters were never intended to run air conditioners, microwaves , coffee machines and the like.....that is until lithium came into the RV market. For low current devices (under 600W) it is fine to connect an inverter to your AGM battery system. AGM batteries can put out low current for a long period of time. When you need to go near 1000W or more , then you should consider a lithium battery.
You can connect an inverter to AGM batteries but you need a lot larger size batteries than lithium (to cope with the high current). A general rule of thumb for AGM or GEL batteries is a 1000W inverter should be coupled with 2 x 120A batteries and a 2000W inverter will need 3 x 120Ah batteries.
Conversely, some 100Ah lithium batteries (Enerdrive, Invicta) can power a 1000W inverter and some 200Ah lithium batteries (Enerdrive) will power a 2000W inverter.
Reviews
Be The First To Review This Product!
Help other CARAVANRVCAMPING users shop smarter by writing reviews for products you have purchased.
Warranty
Warranty Period: 5 Years
Warranty Details: Please CLICK HERE for Warranty Information on this product
Delivery
- We ship Australia-wide with national road express freight companies such as Star Track, TNT and Toll.
- Small Items are sent with Australia Post via regular post.
- Delivery times are generally 3-5 days from day of dispatch for major cities (sometimes quicker). Please allow longer for regional and remote areas.
- Once your item(s) have been dispatched, we will provide you freight tracking information so you can track your delivery to your door.
- Items are fully insured during the freight process.
- Unfortunately we cannot deliver to PO Boxes.
- For further details on our Delivery Process you can visit our Delivery Page HERE.
